Mechanical and Tribological Properties of Carbon Fiber/Glass Fiber-Reinforced Epoxy Hybrid Composites Filled with Al2O3 Particles

dc.contributor.authorKaykılarlı, Cantekin
dc.contributor.authorHaydarov, Aymurat
dc.contributor.authorKöse, Duygu
dc.contributor.authorYeprem, Hasibe Aygül
dc.date.accessioned2026-02-08T15:03:19Z
dc.date.available2026-02-08T15:03:19Z
dc.date.issued2023
dc.departmentBursa Teknik Üniversitesi
dc.description.abstractIn this study, we produced Aluminum oxide (Al2O3) reinforced carbon fiber and glass fiber reinforced polymer (CFRP, GFRP) composites and investigated mechanical and tribological properties. Al2O3 was dispersed in epoxy resin using a mechanical stirrer. The composites are produced via the hand lay-up method and dried at room temperature for 48 hours. The properties of composites were determined via Archimedes’ method, flexural, impact, hardness and wear tests. The highest flexural strength and hardness were found at 946.3 MPa and 48.7 HBA for 3 wt.% Al2O3 reinforced CFRP, respectively. The highest impact strength was observed at 187.4 kJ/m2 for an un-reinforced GFRP composite. The lowest Coefficient of Friction (COF) and wear depth was found 3 wt.% Al2O3 reinforced GFRP composites.
dc.identifier.doi10.17350/HJSE19030000321
dc.identifier.endpage322
dc.identifier.issn2148-4171
dc.identifier.issue4
dc.identifier.startpage317
dc.identifier.urihttps://doi.org/10.17350/HJSE19030000321
dc.identifier.urihttps://hdl.handle.net/20.500.12885/4024
dc.identifier.volume10
dc.language.isoen
dc.publisherHitit Üniversitesi
dc.relation.ispartofHittite Journal of Science and Engineering
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_DergiPark_20260207
dc.subjectComposite and Hybrid Materials
dc.subjectKompozit ve Hibrit Malzemeler
dc.titleMechanical and Tribological Properties of Carbon Fiber/Glass Fiber-Reinforced Epoxy Hybrid Composites Filled with Al2O3 Particles
dc.typeArticle

Dosyalar