ALUMINIUM OXIDE (Al2O3)-FEW LAYER GRAPHENE (FLG) REINFORCED ALUMINIUM HYBRID COMPOSITES

Basit Öğe Kaydı
dc.authorid0000-0002-2380-3258en_US
dc.contributor.authorKaykılarlı, Cantekin
dc.contributor.authorAltinisik, Zehra
dc.contributor.authorKilic, E. Can
dc.contributor.authorUzunsoy, Deniz
dc.contributor.authorYeprem, H. Aygul
dc.date.accessioned2024-06-12T12:18:25Z
dc.date.available2024-06-12T12:18:25Z
dc.date.issued2022en_US
dc.departmentBTÜ, Mühendislik ve Doğa Bilimleri Fakültesi, Metalurji ve Malzeme Mühendisliği Bölümüen_US
dc.description.abstractThe present study investigates the microstructural and mechanical properties of few layer graphene (FLG, 0.1 to 5 wt.%) and aluminium oxide (Al2O3, 4 to 20 wt.%) reinforced Al6061 matrix composites prepared via mechanical alloying (MA), uniaxial pressing and pressureless sintering. The effects of the amounts of Al2O3 and FLG were studied. MA was carried out at 300 rpm for 3 h in a planetary ball mill in argon atmosphere. The mechanically alloyed (MAed) powders were compacted via uniaxial pressing (400 MPa) and sintering (620 degrees C, 2 h). The microstructural and mechanical properties of the Al-xAl(2)O(3)-yFLG powders and bulk samples were investigated via X-ray diffraction (XRD), light microscopy (LM), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), the Archimedes' method and a hardness test. In the XRD analysis, the aluminium carbide (Al4C3) phase was not detected. The SEM, LM micrographs and EDS results show that the produced composites have a homogeneous structure. Based on the Archimedes' method, the densification rates of the rein-forced samples were higher than the unreinforced sample. The Al-20Al(2)O(3)-3FLG sample exhibited the highest relative density, 99.25%. According to the hardness measurements, the highest hardness value was 87.28 HV for the Al-20Al(2)O(3)-1FLG composite and increased twofold compared to Al6061.en_US
dc.identifier.endpage78en_US
dc.identifier.issn2084-6096
dc.identifier.issn2299-128X
dc.identifier.issue2en_US
dc.identifier.startpage72en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12885/2266
dc.identifier.volume22en_US
dc.identifier.wosWOS:000825137100002
dc.institutionauthorKaykılarlı, Cantekin
dc.language.isoengen_US
dc.publisherPOLISH SOC COMPOSITE MATERIALSen_US
dc.relation.ispartofCOMPOSITES THEORY AND PRACTICEen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAl matrix compositesen_US
dc.subjectAl6061en_US
dc.subjectaluminium oxideen_US
dc.subjectfew -layer grapheneen_US
dc.subjectpowder metallurgyen_US
dc.subjecthardnessen_US
dc.titleALUMINIUM OXIDE (Al2O3)-FEW LAYER GRAPHENE (FLG) REINFORCED ALUMINIUM HYBRID COMPOSITESen_US
dc.typeArticleen_US

Dosyalar

Lisans paketi
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Metalurji ve Malzeme Mühendisliği Bölümü Yayın Koleksiyonu