Effect of Epoxy Resin Reinforcement on Screw Withdrawal Strength of Fiberboard and Particleboard Used in Furniture Industry

Basit Öğe Kaydı
dc.authorid0000-0002-7161-630X
dc.authorid0000-0002-3907-0896
dc.authorid0000-0003-0114-3030
dc.contributor.authorUysal, Mesut
dc.contributor.authorTasdemir, Cagatay
dc.contributor.authorMemis, Dogan
dc.date.accessioned2026-02-12T21:05:07Z
dc.date.available2026-02-12T21:05:07Z
dc.date.issued2023
dc.departmentBursa Teknik Üniversitesi
dc.description.abstractThe study aimed to increase the screw withdrawal strength of medium density fiberboard and particleboard used in furniture strength by using epoxy resin in the screw pilot hole. Therefore, the effects of pilot hole diameters, screw diameter, and amount of epoxy resin on screw withdrawal strength of medium density fiberboard and particleboard from face and edge were investigated. According to TS EN 13446, 50 mm x 50 mm specimens were cut from commercial medium density fiberboard and particleboard boards. A static load was applied parallel to the screw direction. The screw withdrawal strength of medium density fiberboard was higher than the screw withdrawal strength of particleboard because of its density. Besides, the screw withdrawal strength of medium density fiberboard and particleboard samples with a 3.5 mm screw diameter was higher compared to those with a 4.5 mm screw diameter. A decrease in pilot hole diameter and an increase in the amount of epoxy resin provided higher screw withdrawal strength of materials. Using 20 % epoxy resin of the volume of the pilot hole resulted in two times better screw withdrawal strength values. The study showed that a higher amount of epoxy resin, smaller pilot hole diameter, and smaller screw diameter contribute to better screw withdrawal strength of both medium density fiberboard and particleboard from the face and edge.
dc.description.sponsorshipScientific Research Projects Coordinatorship at Bursa Technical University [211N018]
dc.description.sponsorshipThis research was funded by the Scientific Research Projects Coordinatorship at Bursa Technical University (Project no: 211N018, 2021).
dc.identifier.doi10.5552/drvind.2023.0146
dc.identifier.endpage500
dc.identifier.issn0012-6772
dc.identifier.issn1847-1153
dc.identifier.issue4
dc.identifier.scopus2-s2.0-85179662016
dc.identifier.scopusqualityQ3
dc.identifier.startpage491
dc.identifier.urihttps://doi.org/10.5552/drvind.2023.0146
dc.identifier.urihttps://hdl.handle.net/20.500.12885/6811
dc.identifier.volume74
dc.identifier.wosWOS:001127609600009
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherZagreb Univ, Fac Forestry
dc.relation.ispartofDrvna Industrija
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_WoS_20260212
dc.subjectepoxy resin
dc.subjectreinforcement
dc.subjectscrew withdrawal strength
dc.subjectmedium density fiberboard
dc.subjectparticle-board
dc.titleEffect of Epoxy Resin Reinforcement on Screw Withdrawal Strength of Fiberboard and Particleboard Used in Furniture Industry
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu