Different methods applied to remove pollutants from real epoxy paint wastewater: modeling using the response surface method

Basit Öğe Kaydı
dc.authorid0000-0002-6321-0350en_US
dc.contributor.authorAdar, Elanur
dc.contributor.authorIlhan, Fatih
dc.contributor.authorAygün, Ahmet
dc.date.accessioned2022-08-05T13:28:33Z
dc.date.available2022-08-05T13:28:33Z
dc.date.issued2021en_US
dc.departmentBTÜ, Mühendislik ve Doğa Bilimleri Fakültesi, Çevre Mühendisliği Bölümüen_US
dc.description.abstractComparing between classical and advanced methods for the treatment of industrial wastewater is extremely important to optimize factory operations and cost, and reduce the effects on environment. In the present study, some classical and advanced processes were assessed for chemical oxygen demand (COD) removal, the biggest problem in the wastewater from a factory producing epoxy paints. The response surface methodology was used for optimization. While the chemical coagulation (CC) and classical Fenton (CF) processes were used as the traditional methods, the electrocoagulation (EC) and electro-Fenton (EF) processes were used as the advanced methods to treat wastewater. As a result, the highest COD removal efficiencies were obtained in EF (97.8%) and CF (88.6%), respectively. Low COD removal efficiencies (43.5% and 47.5% respectively) were achieved in coagulation-based processes (CC and EC). Operating cost for CF calculated as 2.15 euro/m(3). Considering in terms of treatment efficiency, sludge volume and operating cost, CF is the most suitable option for the management of epoxy paint wastewater (EPW). These results also show that Fenton-based methods provide higher removal yields for the treatment of EPW. In other words, it is stable wastewater and the presence of hydroxyl radicals is required for its successful management.en_US
dc.identifier.doi10.1080/01496395.2021.1907410en_US
dc.identifier.endpage507en_US
dc.identifier.issn0149-6395
dc.identifier.issn1520-5754
dc.identifier.issue3en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage492en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12885/2027
dc.identifier.volume57en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.institutionauthorAygün, Ahmet
dc.language.isoenen_US
dc.publisherTaylor and Francis Ltd.en_US
dc.relation.ispartofSEPARATION SCIENCE AND TECHNOLOGYen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectCoagulationen_US
dc.subjectelectrocoagulationen_US
dc.subjectepoxy paint wastewateren_US
dc.subjectFentonen_US
dc.subjectelectro-Fentonen_US
dc.titleDifferent methods applied to remove pollutants from real epoxy paint wastewater: modeling using the response surface methoden_US
dc.typeArticleen_US

Dosyalar

Lisans paketi
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Çevre Mühendisliği Bölümü Yayın Koleksiyonu