Investigation of Wear Behavior of Aluminum Alloy Reinforced with Carbon Nanotubes

Basit Öğe Kaydı
dc.authorid0000-0002-2515-7624en_US
dc.contributor.authorUzunsoy, Deniz
dc.contributor.authorPeng, T.
dc.contributor.authorChang, I.
dc.contributor.authorIstif, I.
dc.date.accessioned2021-03-20T20:26:57Z
dc.date.available2021-03-20T20:26:57Z
dc.date.issued2014
dc.departmentBTÜ, Mühendislik ve Doğa Bilimleri Fakültesi, Metalurji ve Malzeme Mühendisliği Bölümüen_US
dc.description.abstractThe material demands for advanced technologies have led to development of new generation, light-weight, and multi-functional materials. Aluminum matrix composites (AMCs) have captured considerable attention in aviation, space and automotive industries in recent years. Carbon nanotubes (CNT) are one of the most promising candidate of reinforcements used to improve mechanical strength and hardness of metal matrix composites (MMCs). In this study, dry sliding wear behavior of aluminum (Al) matrix (MMCs) reinforced with different amounts (0, 0.5, 1 and 2 wt%) of CNTs were prepared through ball milling, the process was followed by compaction at room temperature and pressureless sintering at 630 °C under argon atmosphere for 1hr. Wear tests were performed on a pin-on-disk tribometer against SAE 1040 steel counter body under constant load and sliding speed at room temperature. Worn surfaces of composites were characterized by scanning electron microscopy (SEM) technique in order to identify dominant wear mechanism of the as-produced composite materials. Preliminary result of this study showed that the composite displayed lower wear rate and friction coefficient under mild wear conditions comparing to aluminum alloy without reinforcement. © 2014 SAE International.en_US
dc.identifier.doi10.4271/2014-01-1008en_US
dc.identifier.issn1946-3979
dc.identifier.issue3en_US
dc.identifier.scopus2-s2.0-84898068850en_US
dc.identifier.scopusqualityQ4en_US
dc.identifier.urihttp://doi.org/10.4271/2014-01-1008
dc.identifier.urihttps://hdl.handle.net/20.500.12885/1365
dc.identifier.volume7en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorUzunsoy, Deniz
dc.language.isoenen_US
dc.relation.ispartofSAE International Journal of Materials and Manufacturingen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subject[No Kerywords]en_US
dc.titleInvestigation of Wear Behavior of Aluminum Alloy Reinforced with Carbon Nanotubesen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu
Metalurji ve Malzeme Mühendisliği Bölümü Yayın Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu