OPTIMIZATION OF CUTTING PARAMETERS USING THE RESPONSE SURFACE METHOD

Basit Öğe Kaydı
dc.authorid0000-0002-0729-633Xen_US
dc.contributor.authorGuvercin, Salih
dc.contributor.authorYıldız, Aytaç
dc.date.accessioned2021-03-20T20:13:30Z
dc.date.available2021-03-20T20:13:30Z
dc.date.issued2018
dc.departmentBTÜ, Mühendislik ve Doğa Bilimleri Fakültesi, Endüstri Mühendisliği Bölümüen_US
dc.description.abstractSome cutting parameters have to be considered in order to obtain high-quality surfaces in machining. Because poorly selected cutting parameters cause both the cutting tools to wear out quickly and the surface to become rough. Therefore, it is of great importance to use experimental design methods to obtain better quality surfaces with an optimal combination of cutting parameters. In this study, optimization of cutting parameters such as feed rate, cutting speed and depth of cut, which affects the surface roughness of AISI 1040 steel the commonly used in the industry, is aimed by three-level Box-Behnken design combined with response surface methodology. For this purpose, 15 workpieces with empty set 70 mm and 200 mm length were prepared and machined on a CNC lathe. Then, the surface roughness values of the workpieces were measured. The obtained surface roughness values were analyzed in the Design Expert 10.0.6 program and the cutting parameters affecting the surface roughness were optimized. According to the results obtained from the study, it was determined that the feed rate is the parameter that has the greatest effect on the surface roughness. In addition, optimum surface roughness was determined by a feed rate of 0.2 mm/rev, a cutting speed of 397.58 m/min and a depth of cut 1.5617 mm.en_US
dc.identifier.endpage121en_US
dc.identifier.issn1304-7205
dc.identifier.issn1304-7191
dc.identifier.issue1en_US
dc.identifier.startpage113en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12885/883
dc.identifier.volume36en_US
dc.identifier.wosWOS:000432662200010en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.institutionauthorYıldız, Aytaç
dc.language.isoenen_US
dc.publisherYildiz Technical Univen_US
dc.relation.ispartofSigma Journal Of Engineering And Natural Sciences-Sigma Muhendislik Ve Fen Bilimleri Dergisien_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectBox-Behnken designen_US
dc.subjectresponse surface methodologyen_US
dc.subjectsurface roughnessen_US
dc.titleOPTIMIZATION OF CUTTING PARAMETERS USING THE RESPONSE SURFACE METHODen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Endüstri Mühendisliği Bölümü Yayın Koleksiyonu