Phosphorus removal from domestic wastewater in electrocoagulation reactor using aluminium and iron plate hybrid anodes
Küçük Resim Yok
Tarih
2018
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Elsevier Science Bv
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
The aim of this study was to investigate the effects of initial pH (pH(i) = 4.0-7.0), current density (j = 10-40 A/m(2)), initial phosphorus (P) concentration (C-i of 5.01-52.13 mg/L) and electrocoagulation (EC) time (t(Ec) = 10-100 min) on phosphorus removal from domestic wastewater by a batch EC reactor using hybrid aluminium (Al)-iron (Fe) anodes and titanium cathode. Phosphorus removal from domestic wastewater containing 52.13 mg/L PO4-P was obtained to be 99.99% at optimum conditions (pH(i) = 4, j = 20 A/m(2) and EC time = 80 min). The energy and electrode consumptions at optimum conditions were calculated as 3.422 kWh/m(3) and 0.328 kg/m(3), respectively. The amount of removed P per electrochemically dissolved total metal electrode (q(e)) was calculated as 55.69 mg P/g, while the dissolved metal to removed phosphorus ratio (M-e/P, mol/mol) was 4.40 (Fe/P = 2.63 and Al/P = 1.77) at optimum conditions. It can be concluded that phosphorus removal by hybrid Al-Fe anodes is as effective as using only Fe or Al anodes as per the results present in literature. In addition, the effluent pH after EC treatment process at optimum conditions was 8.8, hence requiring no pH adjustment before discharge.
Açıklama
Anahtar Kelimeler
Phosphorus removal, Electrocoagulation, Hybrid electrode, Domestic wastewater
Kaynak
Ecological Engineering
WoS Q Değeri
Q2
Scopus Q Değeri
Q1
Cilt
123
