Investigation of mechanical properties of hybrid stainless steel/acrylic and carbon fiber reinforced epoxy composite

Basit Öğe Kaydı
dc.authorid0000000342066051en_US
dc.authorid0000-0003-1500-7347en_US
dc.authorid0000-0003-2960-5188en_US
dc.contributor.authorYılmaz, Ayten Nur Yüksel
dc.contributor.authorYunus, Doruk Erdem
dc.contributor.authorBedeloğlu, Ayşe
dc.date.accessioned2022-10-12T10:31:57Z
dc.date.available2022-10-12T10:31:57Z
dc.date.issued2022en_US
dc.departmentBTÜ, Mühendislik ve Doğa Bilimleri Fakültesi, Polimer Malzeme Mühendisliği Bölümüen_US
dc.description.abstractHybrid composite specimens were produced with stainless steel-acrylic (SSA) and carbon fiber reinforcement in order to achieve ductile behavior compared to CF reinforced epoxy composites. Laminated composites containing CF and SSA fabrics in with different ply configurations were manufactured using vacuum infusion method. In addition, CF fabric was used in two different ply orientations (0-45 degrees). In both the flexural and tensile test results, composites having CF oriented at 0 degrees showed higher strength and modulus but lower strain than composites having CF oriented at 45 degrees. When the number of carbon fiber layers increased, the composites showed high strength and modulus, but low strain. Increasing the number of SSA significantly increased the flexural and tensile strains of laminated composites. After the mechanical tests, the fracture surfaces of the specimens were examined with an optical microscope and matrix cracks, fiber breakage, fiber pull-out and delamination failures were observed.en_US
dc.identifier.doi10.1177/00219983221106249en_US
dc.identifier.endpage2866en_US
dc.identifier.issn1530-793X
dc.identifier.issue18en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage2855en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12885/2075
dc.identifier.volume56en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.institutionauthorYılmaz, Ayten Nur Yüksel
dc.institutionauthorYunus, Doruk Erdem
dc.institutionauthorBedeloğlu, Ayşe
dc.language.isoenen_US
dc.publisherSAGE PUBLICATIONS LTDen_US
dc.relation.ispartofJOURNAL OF COMPOSITE MATERIALSen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectpolymer-matrix compositesen_US
dc.subjectmechanical propertiesen_US
dc.subjecthybrid reinforcementen_US
dc.subjectvacuum infusionen_US
dc.subjectstainless steelen_US
dc.titleInvestigation of mechanical properties of hybrid stainless steel/acrylic and carbon fiber reinforced epoxy compositeen_US
dc.typeArticleen_US

Dosyalar

Lisans paketi
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Polimer Malzeme Mühendisliği Bölümü Yayın Koleksiyonu