Usage of 3D Printed Polylactic Acid as a Core Material in Forming of Carbon Fiber Fabric Composite

Basit Öğe Kaydı
dc.contributor.authorKaya, Onur
dc.contributor.authorGümüş, Ömer Yunus
dc.contributor.authorKüçük, İsrafil
dc.contributor.authorAslan, Serdar
dc.date.accessioned2026-02-08T15:05:08Z
dc.date.available2026-02-08T15:05:08Z
dc.date.issued2023
dc.departmentBursa Teknik Üniversitesi
dc.description.abstractThe weak bonds between the layers of a part produced by the Fused Deposition Modeling (FDM) method causes damage at an early stage. To overcome the strength problem, FDM parts are manufactured with engineering thermoplastics or reinforced with carbon/glass fiber. Although these studies provided partial improvement on the mechanical strength of the part, the bond strength between the layers was not significantly improved. In this study, we aimed to reduce the negative effect of the weakness in the interlayer bond strength on the strength of the final part. Therefore, a composite laminate was applied on a polylactic acid (PLA) core produced by the FDM method. Weight measurement, tensile test, three-point bending test and weight drop test were performed on the produced test samples. Tensile and bending test results indicates that the composite layer applied on the core produced by the FDM method has a positive effect on the mechanical strength and bending properties. It is concluded that the study will be a source for future research on moldless composite production.
dc.identifier.doi10.32710/tekstilvekonfeksiyon.1056781
dc.identifier.endpage151
dc.identifier.issn1300-3356
dc.identifier.issn2602-3075
dc.identifier.issue2
dc.identifier.startpage144
dc.identifier.urihttps://doi.org/10.32710/tekstilvekonfeksiyon.1056781
dc.identifier.urihttps://hdl.handle.net/20.500.12885/4461
dc.identifier.volume33
dc.identifier.wosWOS:001028791700005
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Science
dc.language.isoen
dc.publisherEge Üniversitesi
dc.relation.ispartofTekstil ve Konfeksiyon
dc.relation.ispartofTextile and Apparel
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_DergiPark_20260207
dc.subjectWearable Materials
dc.subjectGiyilebilir Malzemeler
dc.titleUsage of 3D Printed Polylactic Acid as a Core Material in Forming of Carbon Fiber Fabric Composite
dc.typeArticle

Dosyalar

Koleksiyon

Öksüz Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu