The Effect of Sulfonate and Phosphate Anionic Monomers of Water Reducing Admixtures on Fresh State and Mechanical Properties of Self Compacting Concrete

Küçük Resim Yok

Tarih

2022

Dergi Başlığı

Dergi ISSN

Cilt Başlığı

Yayıncı

Bursa Uludağ Üniversitesi

Erişim Hakkı

info:eu-repo/semantics/openAccess

Özet

In this study, the effect of anionic monomer content of polycarboxylate-ether based water reducing admixture on various fresh and hardened state properties of self-compacting concrete (SCC)mixtures was investigated. For this purpose, in addition to the control admixture whose anionic monomer is 100% carboxylate, 5 different water reducing admixtures were synthesized by replacing the anionic monomer of the control admixture with 10% and 30% sulfonate and phosphate. According to the results, the substitution of the water reducing admixture anionic monomer with sulfonate increases the admixture requirement of the mixtures; had a positive effect on time-dependent flowing performances. In the case of phosphate substitution, the admixture requirement of the mixtures decreased, while the time-dependent flowing performance was adversely affected. The best performance among all mixtures was obtained with 10% sulfonate substituted admixture. The anionic monomer change did not cause any significant changes in the compressive strength, water absorption rates, ultrasonic pulse velocity (UPV) and dynamic elasticity modules of the SCC mixtures. 
Bu çalışmada, polikarboksilat-eter esaslı su azaltıcı katkının anyonik monomer içeriğinin kendiliğinden yerleşebilen beton (KYB) karışımlarının çeşitli taze ve sertleşmiş hal özelliklerine etkisi araştırılmıştır. Bu amaçla, anyonik monomeri %100 karboksilat olan kontrol katkısına ilaveten, kontrol katkısının anyonik monomerinin %10 ve %30 oranında sülfonat ve fosfat ile ikame edilmesiylebirbirinden farklı 5 adet su azaltıcı katkı sentezlenmiştir. Elde edilen sonuçlara göre, su azaltıcı katkı anyonik monomerinin sülfonat ile ikame edilmesi, karışımların katkı ihtiyacını artırırken; zamana bağlı yayılma performanslarını olumlu yönde etkilemiştir. Fosfat ikame edilmesi durumunda ise karışımların katkı ihtiyacı azalırken zamana bağlı yayılma performansı olumsuz etkilenmiştir. Tüm karışımlar içerisinde taze hal özellikleri açısından en iyi performans %10 sülfonat ikame edilen katkı ile elde edilmiştir. Anyonik monomer değişimi, KYB karışımlarının basınç dayanımları, su emme oranları, ultrases geçiş hızları (UPV) ve dinamik elastisite modüllerinde önemli bir değişikliğe sebep olmamıştır

Açıklama

219M425, 217M408, AYP (MH)-2016/16, DDP (MH)-2018/9, DDP(MH)-2019/15

Anahtar Kelimeler

Civil Engineering, İnşaat Mühendisliği

Kaynak

Uludağ Üniversitesi Mühendislik Fakültesi Dergisi
Uludağ University Journal of The Faculty of Engineering

WoS Q Değeri

Scopus Q Değeri

Cilt

27

Sayı

2

Künye