Efficient use of waste photopolymer plates in bitumen modification and an alternative styrene-butadiene-styrene modification method

Basit Öğe Kaydı
dc.authorid0000-0002-5596-9658
dc.authorid0000-0002-7496-6006
dc.contributor.authorKok, Baha Vural
dc.contributor.authorYetkin, Zulfu
dc.contributor.authorYalcin, Erkut
dc.contributor.authorOzdemir, Ahmet Munir
dc.date.accessioned2026-02-08T15:14:56Z
dc.date.available2026-02-08T15:14:56Z
dc.date.issued2024
dc.departmentBursa Teknik Üniversitesi
dc.description.abstractPhotopolymers, which are composed of monomer, oligomer polymer, and their combinations and exhibit photochemical reactions when exposed to light, are now commonly employed in 3D printers, particularly in the flexographic printing industry, and are becoming waste. The utilization of waste solid sheet Photopolymer Plates (PhP) for bitumen modification is an efficient way of disposing of post-consumer items and an alternate method of obtaining new, high-quality modifiers. The consequences of using waste PhP in bitumen modification, both independently and in conjunction with Styrene-Butadiene-Styrene (SBS) were explored. By combining PhP and SBS, it is hoped that savings can be made without sacrificing performance due to the high rate of single SBS modification. The modified binders prepared using PhP and SBS both separately and together were subjected to conventional and rheological tests. The performance of 5% SBS modification could not be achieved at the highest rate that PhP can be used alone without creating a workability problem. The use of 5-7% PhP in combination with 2% SBS outperformed the single 5% SBS modification. This combined binder did not cause workability problems and showed good low and high-temperature behavior and was found to be an economical alternative to SBS modification.
dc.identifier.doi10.1007/s10163-024-02047-w
dc.identifier.endpage3432
dc.identifier.issn1438-4957
dc.identifier.issn1611-8227
dc.identifier.issue6
dc.identifier.scopus2-s2.0-85201421821
dc.identifier.scopusqualityQ2
dc.identifier.startpage3416
dc.identifier.urihttps://doi.org/10.1007/s10163-024-02047-w
dc.identifier.urihttps://hdl.handle.net/20.500.12885/5508
dc.identifier.volume26
dc.identifier.wosWOS:001292346500001
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherSpringer
dc.relation.ispartofJournal of Material Cycles and Waste Management
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzWOS_KA_20260207
dc.subjectBitumen
dc.subjectWaste photopolymer
dc.subjectSBS
dc.subjectModification
dc.subjectRheology
dc.titleEfficient use of waste photopolymer plates in bitumen modification and an alternative styrene-butadiene-styrene modification method
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu