Characterization of heating elements of different dimensions used in resistance welding of thermoplastic matrix composite materials

Basit Öğe Kaydı
dc.contributor.authorÖztürkmen, Hakan
dc.contributor.authorUsta, Yusuf
dc.contributor.authorToros, Serkan
dc.contributor.authorÖztürk, Fahrettin
dc.date.accessioned2026-02-08T15:05:30Z
dc.date.available2026-02-08T15:05:30Z
dc.date.issued2023
dc.departmentBursa Teknik Üniversitesi
dc.description.abstractResistance welding is one of the most useful methods for joining of thermoplastic composite materials. In this method, the joining process between two thermoplastic composite materials by passing a current through a stainless-steel heating element under pressure for a certain period. Within the scope of this study, meshes with a width of 12.7, 25.4, 38.1, 50.8, 63.5, 76.2 mm and a length of 160 mm were used to characterize the joule heating performance. These meshes have a mesh range of 33, 45, 61, 91, 109 and 154 microns. The temperature values on the heating elements were observed with a thermal camera by giving different current values to the relevant elements. Results reveal that the 12.7 x 160 mm heating element with 33-micron mesh spacing reached 349 ? under 10 A current, and the temperature value increased with current. In addition, it was determined that the resistance values of the heating elements with different widths were determined by the relevant system and the resistance properties changed non-linearly with the width.
dc.identifier.doi10.29228/JIENS.70527
dc.identifier.endpage227
dc.identifier.issn2791-7630
dc.identifier.issue2
dc.identifier.startpage219
dc.identifier.urihttps://doi.org/10.29228/JIENS.70527
dc.identifier.urihttps://hdl.handle.net/20.500.12885/4721
dc.identifier.volume3
dc.language.isoen
dc.publisherİdris Karagöz
dc.relation.ispartofYenilikçi Mühendislik ve Doğa Bilimleri
dc.relation.ispartofJournal of Innovative Engineering and Natural Science
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_DergiPark_20260207
dc.subjectResource Technologies
dc.subjectKaynak Teknolojileri
dc.titleCharacterization of heating elements of different dimensions used in resistance welding of thermoplastic matrix composite materials
dc.typeArticle

Dosyalar

Koleksiyon

Öksüz Yayınlar Koleksiyonu