Some printing parameters affecting the screw withdrawal strength of materials used in joints developed in 3D printers for furniture

Basit Öğe Kaydı
dc.contributor.authorUysal, Mesut
dc.date.accessioned2026-02-08T15:11:01Z
dc.date.available2026-02-08T15:11:01Z
dc.date.issued2024
dc.departmentBursa Teknik Üniversitesi
dc.description.abstractThis study examined to benchmark the screw withdrawal strength (SWS) of the 3D-printed PLA materials considering various infill patterns and ratios. SWS is one of the critical material properties for furniture joints. For this purpose, dimensions of 10 × 50 × 50 mm specimens made of PLA+ were printed according to ASTM D 6117-18. Three infill patterns (line, grid, and concentric) and four infill ratios (25%, 50%, 75%, and 100%) were used as printing parameters to construct a complete 3 × 4 factorial experiment. According to the results, line infill patterns had the highest density compared to the grid and concentric patterns for all infill ratios. Concentric infill patterns with an infill ratio of 100% (108.41 MPa) had the greatest SWS. Grid infill patterns provided higher strength at the lower infill ratios than line and concentric infill patterns. Here, diffusion for interfaces of strands affected the SWSs of the 3D-printed materials. This study would provide insight into the 3D-printed joints in the field of furniture mechanics. © 2024, DergiPark. All rights reserved.
dc.identifier.doi10.33725/mamad.1555655
dc.identifier.endpage162
dc.identifier.issue2
dc.identifier.scopus2-s2.0-85219671644
dc.identifier.scopusqualityQ4
dc.identifier.startpage150
dc.identifier.trdizinid1290265
dc.identifier.urihttps://doi.org/10.33725/mamad.1555655
dc.identifier.urihttps://search.trdizin.gov.tr/tr/yayin/detay/1290265
dc.identifier.urihttps://hdl.handle.net/20.500.12885/5175
dc.identifier.volume7
dc.indekslendigikaynakScopus
dc.indekslendigikaynakTR-Dizin
dc.language.isoen
dc.publisherDergiPark
dc.relation.ispartofFurniture and Wooden Material Research Journal
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzScopus_KA_20260207
dc.subject3D printing
dc.subjectFurniture joint
dc.subjectPolylactic acid
dc.subjectScrew withdrawal strength
dc.titleSome printing parameters affecting the screw withdrawal strength of materials used in joints developed in 3D printers for furniture
dc.title.alternativeMobilyalar için 3B yazıcılarda geliştirilen birleştirmelerde kullanılan malzemenin vida tutma kapasitesini etkileyen bazı baskı parametreleri
dc.typeArticle

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu
TR-Dizin İndeksli Yayınlar Koleksiyonu