Alüminyum kaplama için soya fasulyesi yağı bazlı fotokürlenebilir poliüretan akrilatların sentezi ve uygulaması

dc.contributor.authorOzer, Berivan
dc.contributor.authorKuş, Betül Nur
dc.contributor.authorYetman, Pelin
dc.contributor.authorDemircioğlu, Müslüm
dc.contributor.authorEryılmaz, Oğuz
dc.contributor.authorSancak, Erhan
dc.contributor.authorYıldız, Zehra
dc.date.accessioned2026-02-08T15:05:21Z
dc.date.available2026-02-08T15:05:21Z
dc.date.issued2025
dc.departmentBursa Teknik Üniversitesi
dc.descriptionThis study was financially supported by TÜBITAK IRA-SME project with the grant number “122N399”.
dc.description.abstractBu çalışmada, ilk olarak akrilik asit (AA) ve epoksitlenmiş soya fasulyesi yağı (ESBO) reaksiyona sokulmuştur. Daha sonra elde edilen akrillenmiş ESBO (AESBO) oligomeri, 2,4-toluen diizosiyanat - 2-hidroksietil metakrilat (TDI-HEMA) ara ürününün izosiyanat grupları ile reaksiyona sokulmuştur. TDI, küresel poliüretan endüstrisinde en yaygın olarak üretilen ve kullanılan izosiyanat formu olduğu için izosiyanat kaynağı olarak seçilmiştir. HEMA, sırasıyla UV kürleme ve poliüretan üretimi için gereken hidroksil ve akrilat gruplarını sağlamıştır. Ayrıca oligomer, HEMA'nın metil yan grubu nedeniyle esnektir. Kaplama formülasyonları, sentezlenen TDI-HEMA modifiye AESBO oligomerinin yanı sıra çeşitli reaktif seyrelticiler ve bir foto başlatıcı içermektedir. Hazırlanan formülasyonlar alüminyum plakalar üzerine sprey kaplama ile uygulanmış ve UV ışığı ile kürlenmiştir. Reaktif seyreltici türünün film oluşturma ve kaplama performansı üzerindeki etkisi araştırılmıştır.
dc.description.abstractThe aim of this work is to create a new bio-based photocurable oligomer by starting with soybean oil instead of petroleum-based chemicals. For this purpose, acrylic acid (AA) and epoxidized soybean oil (ESBO) were initially reacted. Then the obtained acrylated ESBO (AESBO) oligomer was reacted with the isocyanate groups of the 2,4-toluene diisocyanate - 2-hydroxyethyl methacrylate (TDI-HEMA) adduct. TDI was chosen as the isocyanate source since it is the most widely produced and used form of isocyanate in the global polyurethane industry. HEMA provided the hydroxyl and acrylate groups needed for UV curing and polyurethane production, respectively. Additionally, the oligomer is flexible due to the methyl side group of HEMA. The synthesized oligomer was characterized by Fourier transform infrared (FTIR) spectroscopy and differential scanning calorimetry (DSC) analysis. The coating compositions included the produced TDI-HEMA modified AESBO oligomer, as well as a variety of reactive diluents and a photoinitiator. Then formulations were applied on aluminum plates by spray coating and cured by UV light. The impact of the type of reactive diluent on the film forming and coating performance were all searched. Overall results proved that the inclusion of reactive diluents in the coating formulations helped to increase the coating quality and performance by adjusting the crosslinking density resulting in enhancement in adhesion.
dc.description.sponsorshipTÜBİTAK IRA-SME
dc.identifier.doi10.61112/jiens.1536513
dc.identifier.endpage283
dc.identifier.issn2791-7630
dc.identifier.issue1
dc.identifier.startpage273
dc.identifier.urihttps://doi.org/10.61112/jiens.1536513
dc.identifier.urihttps://hdl.handle.net/20.500.12885/4614
dc.identifier.volume5
dc.language.isoen
dc.publisherİdris Karagöz
dc.relation.ispartofYenilikçi Mühendislik ve Doğa Bilimleri
dc.relation.ispartofJournal of Innovative Engineering and Natural Science
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_DergiPark_20260207
dc.subjectPolymer Science and Technologies
dc.subjectPolimer Bilimi ve Teknolojileri
dc.titleAlüminyum kaplama için soya fasulyesi yağı bazlı fotokürlenebilir poliüretan akrilatların sentezi ve uygulaması
dc.title.alternativeSynthesis and application of soybean oil based photocurable polyurethane acrylates for aluminum coating
dc.typeArticle

Dosyalar