Evaluation of Cutting Temperature and Optimization in Milling of GGG60 Cast Iron

Basit Öğe Kaydı
dc.contributor.authorDüzce, Raşit
dc.contributor.authorSamtaş, Gürcan
dc.date.accessioned2026-02-08T15:04:49Z
dc.date.available2026-02-08T15:04:49Z
dc.date.issued2024
dc.departmentBursa Teknik Üniversitesi
dc.description.abstractSpheroidal graphite cast irons have increased ductility, tensile strength, and toughness compared to other cast irons. Additionally, it can be mentioned that choosing spheroidal graphite cast iron over steel material has a better machining feature. In this study, Face milling operations were carried out using GGG60 material and different inserts, feed, and depth of cut. The Taguchi method was used for the experimental design, and 27 experiments were carried out. During the experiments, a thermal camera measured the temperature from the cutting zone. Experimental results were evaluated with analysis of variance and graphics, and cutting parameters were optimized. As a result of the optimization, optimum parameters for minimum temperature, TiAlN coated insert, 300 m/min cutting speed, 0.30 mm/tooth feed rate, and 0.5 mm depth of cut were found. According to the results obtained from the study, the most influential parameter affecting the temperature was the cutting speed. In addition, the TiAlN-coated insert has been observed as the most suitable coating type for minimum temperature.
dc.identifier.doi10.38088/jise.1195520
dc.identifier.endpage77
dc.identifier.issn2602-4217
dc.identifier.issue1
dc.identifier.startpage63
dc.identifier.urihttps://doi.org/10.38088/jise.1195520
dc.identifier.urihttps://hdl.handle.net/20.500.12885/4226
dc.identifier.volume8
dc.language.isoen
dc.publisherBursa Teknik Üniversitesi
dc.relation.ispartofJournal of Innovative Science and Engineering
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_DergiPark_20260207
dc.subjectMaterial Production Technologies
dc.subjectMalzeme Üretim Teknolojileri
dc.titleEvaluation of Cutting Temperature and Optimization in Milling of GGG60 Cast Iron
dc.typeArticle

Dosyalar

Koleksiyon

Journal of Innovative Science and Engineering Koleksiyonu