Increasing Average Output Power by using a Fuzzy Logic Based Maximum Power Point Tracking Method in Wind Power Plants
Küçük Resim Yok
Tarih
2024
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Institute of Electrical and Electronics Engineers Inc.
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
In solar and wind power plants, it is desired that the power generated is always maximum. However, changes in the input parameters of the system may prevent this. Maximum power point tracking (MPPT) methods can be used especially in solar power plants. In wind power plants, speed and direction of the wind are always variable. As in solar power plants, instantaneous/average power amounts can be increased in wind power plants by using MPPT methods. In this study, Incremental Conductance, Perturb and Observe, Fuzzy Logic and models created without using any MPPT method were used. The average power values obtained by performing MATLAB/Simulink simulations were compared for the relevant scenarios. According to the results, it is seen that the output power can be increased by using MPPT methods. The highest increase was obtained by using Fuzzy Logic-based method. This is a beneficial result in terms of grid operation and energy planning. © 2024 IEEE.
Açıklama
2024 Electrical, Electronics and Biomedical Engineering Conference at 15th National Conference on Electrical and Electronics Engineering, ELECO 2024 -- 2024-11-28 through 2024-11-30 -- Bursa -- 206315
Anahtar Kelimeler
MATLAB, Solar power plants, Average output power, Average power, Fuzzy-Logic, Input parameter, Maximum Power Point Tracking, Power, Power direction, Solar and winds, Tracking method, Wind power plants, Windmill
Kaynak
WoS Q Değeri
Scopus Q Değeri
N/A
