Determination of Production Parameters of CuCrZr Alloy by Selective Laser Melting Process

Basit Öğe Kaydı
dc.contributor.authorÖzkan, Burcu Aslı
dc.contributor.authorDilsiz, Yusuf
dc.contributor.authorOzates, Cem
dc.contributor.authorSevinç, Enes Furkan
dc.contributor.authorKaykılarlı, Cantekin
dc.contributor.authorKaboglu, Cihan
dc.contributor.authorUzunsoy, Deniz
dc.date.accessioned2026-02-08T15:08:23Z
dc.date.available2026-02-08T15:08:23Z
dc.date.issued2025
dc.departmentBursa Teknik Üniversitesi
dc.description.abstractCuCrZr alloy is a widely preferred material in the space, defense, and electronics industries with its high thermal and electrical conductivity properties. There are limited publications on the investigation of the tribological properties of CuCrZr alloys produced via the selective laser melting (SLM) method. In this study, it was aimed to optimize the process parameters and examine the effect of process parameters on density, hardness, microstructure, and tribological properties of domestically produced CuCrZr powder to be produced by the SLM method, which allows the production of complex structured parts. The optimum process parameters of the CuCrZr alloy were determined as laser power of 435 W, scanning speed of 350 mm/s, layer thickness of 0.02 mm, laser diameter of 0.1 mm, hatch distance of 0.1 mm, and energy density of 621.42 J/mm3. The relative density, hardness, COF, and wear values of the samples produced with the optimized SLM process parameters were obtained as 99% and 96 HV, 0.5520 ±0.1648, and 1.17x 10-4 (mm3/N.m), respectively.
dc.identifier.doi10.35414/akufemubid.1485526
dc.identifier.endpage422
dc.identifier.issn2149-3367
dc.identifier.issue2
dc.identifier.startpage414
dc.identifier.trdizinid1313467
dc.identifier.urihttps://doi.org/10.35414/akufemubid.1485526
dc.identifier.urihttps://hdl.handle.net/20.500.12885/4994
dc.identifier.volume25
dc.indekslendigikaynakTR-Dizin
dc.language.isoen
dc.relation.ispartofAfyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_TR-Dizin_20260207
dc.subjectAdditive Manufacturing
dc.subjectSelective Laser Melting
dc.subjectCuCrZr
dc.subjectTribological Behaviors
dc.titleDetermination of Production Parameters of CuCrZr Alloy by Selective Laser Melting Process
dc.typeArticle

Dosyalar

Koleksiyon

TR-Dizin İndeksli Yayınlar Koleksiyonu