Study on mechanical and microstructural properties of advanced high-strength welded sheet metal

Basit Öğe Kaydı
dc.contributor.authorDamlacik, Serkan
dc.contributor.authorBaydi, Zerrin
dc.contributor.authorKupeli, Seda
dc.contributor.authorKaplan, Duygu
dc.contributor.authorAkan, Rabia şevval
dc.contributor.authorUludag, Muhammet
dc.date.accessioned2026-02-12T21:02:58Z
dc.date.available2026-02-12T21:02:58Z
dc.date.issued2023
dc.departmentBursa Teknik Üniversitesi
dc.description.abstractContinuous research is carried out in the automotive industry to decrease the weight of automobile bodies without reducing durability. For this purpose, the use of welding sheet metal is one of the successful techniques. Welded sheets are formed by combining two or more flat materials with different thicknesses and different mechanical properties, using the welding method, before being shaped in order to provide superior properties. This situation requires more attention during the shaping stages. It is important to calculate the pressures to be applied to the welding areas and to apply the shaping steps in a way that will not reduce the material strength. For this reason, the production stages of the dies to be used in the manufacture of these parts are just as important. In this study, an innovative die design is carried out for the production of welded sheet metal. The microstructure and mechanical properties of the welded sheet formed by the die were examined. The effect of the forces applied to the welding areas on the material and the mechanical properties of the materials of different thicknesses were determined. Within the scope of the study, microstructure analysis, hardness and tensile tests were carried out and the results were examined. When the results obtained were examined, it was seen that the strength and hardness values of the samples obtained from the welded area were higher than the other areas. © 2023 by the authors. This work is licensed under a Creative Commons Attribution-Non Commercial 4.0 International (CC BY-NC 4.0) license.
dc.identifier.doi10.46793/tribomat.2023.002
dc.identifier.endpage77
dc.identifier.issue2
dc.identifier.scopus2-s2.0-85178333353
dc.identifier.scopusqualityQ3
dc.identifier.startpage68
dc.identifier.urihttps://doi.org/10.46793/tribomat.2023.002
dc.identifier.urihttps://hdl.handle.net/20.500.12885/6643
dc.identifier.volume2
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherBalkan Scientific Centre
dc.relation.ispartofTribology and Materials
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsAll Open Access; Gold Open Access; Green Accepted Open Access; Green Open Access
dc.snmzKA_Scopus_20260212
dc.subjectdie technology
dc.subjectmechanical property
dc.subjectmicrostructure
dc.subjectsteel
dc.subjectwelded sheet
dc.titleStudy on mechanical and microstructural properties of advanced high-strength welded sheet metal
dc.typeArticle

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu