Characterization of the effect of Sr and Ti on liquid quality in Al8Si3Cu

Basit Öğe Kaydı
dc.authorid0000-0001-9150-3292en_US
dc.contributor.authorUludağ, Muhammet
dc.contributor.authorDispinar, D.
dc.contributor.authorTiryakioğlu, M.
dc.date.accessioned2021-03-20T20:26:53Z
dc.date.available2021-03-20T20:26:53Z
dc.date.issued2019
dc.departmentBTÜ, Mühendislik ve Doğa Bilimleri Fakültesi, Metalurji ve Malzeme Mühendisliği Bölümüen_US
dc.description.abstractAl8Si3Cu alloy was studied to investigate the effect of casting conditions on melt quality of the molten metal. While Sr and Ti master alloys were used as additional parameters, holding time was performed for effect of held liquid. Experimental study was tried before and after degassing. The reduced pressure test machine was used to produce samples which are five samples for each parameter. Samples were prepared by metallographic methods to be analyzed with via digital image processing. Pores on the surface of the samples were measured in number density and distribution of them was examined statistically. Results showed that while Sr addition and holding time increased casting defects by increasing porosity, degassing decreased the number density of defects, as expected. Therefore, it is a vital result that degassing process must be applied to every casting. In addition, Ti addition was found to have a slight positive effect to reduce porosity, but it was almost negligible when compared to that of degassing process. © The Minerals, Metals & Materials Society 2019.en_US
dc.identifier.doi10.1007/978-3-030-06034-3_17en_US
dc.identifier.endpage175en_US
dc.identifier.issn2367-1181
dc.identifier.scopus2-s2.0-85064063654en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage167en_US
dc.identifier.urihttp://doi.org/10.1007/978-3-030-06034-3_17
dc.identifier.urihttps://hdl.handle.net/20.500.12885/1322
dc.indekslendigikaynakScopusen_US
dc.institutionauthorUludağ, Muhammet
dc.language.isoenen_US
dc.publisherSpringer International Publishingen_US
dc.relation.ispartofMinerals, Metals and Materials Seriesen_US
dc.relation.publicationcategoryKitap Bölümü - Uluslararasıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAl8si3cu alloyen_US
dc.subjectGrain refinementen_US
dc.subjectLiquid qualityen_US
dc.subjectSr modificationen_US
dc.titleCharacterization of the effect of Sr and Ti on liquid quality in Al8Si3Cuen_US
dc.typeBook Chapteren_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu
Metalurji ve Malzeme Mühendisliği Bölümü Yayın Koleksiyonu