The effect of different curing temperatures on engineering properties of chemically grouted sands

Basit Öğe Kaydı
dc.authorid0000-0001-7206-0158en_US
dc.contributor.authorAvcı, Eyübhan
dc.date.accessioned2021-03-20T20:09:28Z
dc.date.available2021-03-20T20:09:28Z
dc.date.issued2020
dc.departmentBTÜ, Mühendislik ve Doğa Bilimleri Fakültesi, İnşaat Mühendisliği Bölümüen_US
dc.description.abstractIn this experimental study, the effect of curing temperature on the engineering properties of sand samples grouted with sodium silicate-glyoxal was investigated. The experiments began with determining gelation times, viscosities, and syneresis percentages of the blends prepared for injection. Thereafter, the injection experiments were carried out at the determined mixing ratios. Grouted specimens were subjected to Unconfined Compressive Strength (UCS) and permeability tests at different curing temperatures (+10 degrees C, +20 degrees C, and +30 degrees C) being kept in the curing tank. As the temperature increased, the viscosity values and gelling times decreased, while the syneresis percentages increased. The UCS of the grouted samples decreased with time. This decreasing trend slowed down in the case of the samples kept at +10 degrees C after the 56th day, while the same was seen in the case of those specimens kept at +20 degrees C and for those kept at +30 degrees C on the 7th and 28th days. Further, UCS values decreased with the increasing temperature. The permeability values of the grouted samples decreased with time. This decreasing trend slowed down after the 28th day. An increase in temperature reduced permeability values. (C) 2020 Sharif University of Technology. All rights reserved.en_US
dc.identifier.doi10.24200/sci.2018.50177.1557en_US
dc.identifier.endpage1161en_US
dc.identifier.issn1026-3098
dc.identifier.issue3en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage1144en_US
dc.identifier.urihttp://doi.org/10.24200/sci.2018.50177.1557
dc.identifier.urihttps://hdl.handle.net/20.500.12885/431
dc.identifier.volume27en_US
dc.identifier.wosWOS:000580592700011en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.institutionauthorAvcı, Eyübhan
dc.language.isoenen_US
dc.publisherSharif Univ Technologyen_US
dc.relation.ispartofScientia Iranicaen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectSodium silicate groutsen_US
dc.subjectCuring temperatureen_US
dc.subjectUnconfined compressive strengthen_US
dc.subjectPermeabilityen_US
dc.subjectGroutabilityen_US
dc.subjectSyneresisen_US
dc.titleThe effect of different curing temperatures on engineering properties of chemically grouted sandsen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
Avci-2018-The-effect-of-various-curing-temper (1).pdf
Boyut:
7.89 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
İnşaat Mühendisliği Bölümü Yayın Koleksiyonu