Arşiv logosu
  • Türkçe
  • English
  • Giriş
    Yeni kullanıcı mısınız? Kayıt için tıklayın. Şifrenizi mi unuttunuz?
Arşiv logosu
  • Koleksiyonlar
  • DSpace İçeriği
  • Analiz
  • Türkçe
  • English
  • Giriş
    Yeni kullanıcı mısınız? Kayıt için tıklayın. Şifrenizi mi unuttunuz?
  1. Ana Sayfa
  2. Yazara Göre Listele

Yazar "Ozdemir, Nisanur Gurcay" seçeneğine göre listele

Listeleniyor 1 - 1 / 1
Sayfa Başına Sonuç
Sıralama seçenekleri
  • Küçük Resim Yok
    Öğe
    Investigation on the rheological behaviour and ageing characteristics of crumb rubber and polyurethane blends under dynamic shear conditions
    (Taylor & Francis Ltd, 2025) Kok, Baha Vural; Yalcin, Erkut; Ozdemir, Ahmet Munir; Ozdemir, Nisanur Gurcay
    This study aims to investigate the effects of the use of crumb rubber (CR) with polyurethane (PU) in bitumen modification on rheological and ageing properties. A novel modified palm-oil-based polyol was reacted with 4,40-diphenylmethane diisocyanate (MDI) to synthesise a polyurethane-derived polymer. Multiple stress creep recovery (MSCR), single point and frequency sweep tests were carried out. The analysis of the binders' viscoelastic behaviour was conducted using the Christensen-Anderson (CA) model. The complex viscosity was modelled using the Cross model. The low-temperature behaviour of the binders was determined by the bending beam rheometer (BBR) test, and the mixing-compaction temperatures were determined by the steady shear flow (SSF) method. Compared to single CR modification, the use of 4% PU in combination with 8% CR (8C + 4P) was found to broaden the relaxation spectrum, increase stiffness, improve shear-thinning resistance, and lead to a notable increase in resistance against ageing. Due to the polymeric networks developed in the 8C + 4P binder, it was determined that it exhibits superior elastic properties at high temperatures and also offers improved durability against low-temperature cracks. It was ascertained that the 8C + 4P binder demonstrated superior performance in both low- and high-temperature conditions compared to the 4% SBS modification, while there was no significant difference in terms of production temperatures.

| Bursa Teknik Üniversitesi | Kütüphane | Açık Erişim Politikası | Rehber | OAI-PMH |

Bu site Creative Commons Alıntı-Gayri Ticari-Türetilemez 4.0 Uluslararası Lisansı ile korunmaktadır.


Mimar Sinan Mahallesi Mimar, Sinan Bulvarı, Eflak Caddesi, No: 177, 16310, Yıldırım, Bursa, Türkiye
İçerikte herhangi bir hata görürseniz lütfen bize bildirin

DSpace 7.6.1, Powered by İdeal DSpace

DSpace yazılımı telif hakkı © 2002-2026 LYRASIS

  • Çerez ayarları
  • Gizlilik politikası
  • Son Kullanıcı Sözleşmesi
  • Geri bildirim Gönder