Investigation of the Compressive Strength and Fresh Properties of Modified Natural Fiber-Reinforced Geopolymer Composites

dc.authorid0000-0001-6685-2319
dc.authorid0000-0001-5522-427X
dc.authorid0000-0002-8554-3025
dc.authorid0000-0003-0326-5015
dc.contributor.authorBenlioğlu, Arif
dc.contributor.authorÖzen, Süleyman
dc.contributor.authorAltın, Yasin
dc.contributor.authorMardani, Ali
dc.date.accessioned2026-11-20T06:34:07Z
dc.date.issued2026
dc.departmentBTÜ, Mühendislik ve Doğa Bilimleri Fakültesi, İnşaat Mühendisliği Bölümü
dc.description.abstractIn this study, the fresh-state properties and compressive strength of sisal fiber–reinforced, blast furnace slag–based geopolymer composites whose surface characteristics were enhanced with graphene oxide (GO) were experimentally investigated. Blast furnace slag was used as the aluminosilicate source in all mortar mixtures. Graphene oxide–coated and uncoated fibers with a length of 0.5 cm were added to the mixtures at volumetric ratios of 0.3% and 0.6%. A sodium hydroxide (NaOH) solution prepared at 12M concentration and sodium silicate (Na₂SiO₃) were used to activate the binder system. The silicate/hydroxide, sand/binder, and activator/binder ratios were kept constant at 2, 2.5, and 0.75, respectively. The prepared mortar samples were subjected to air curing (20±2 °C) for 28 days. The fresh properties (flow diameter) and the hardened-state property (compressive strength) of the produced mortar mixtures were examined. The results revealed that the addition of sisal fibers significantly reduced the fresh-state workability of the geopolymer mortars. Among mixtures with the same fiber content, the graphene oxide modification applied to the fiber surface increased the fresh-state properties by approximately 8–10% and significantly improved workability. The highest compressive strength, 49.04 MPa, was obtained in the SG05-06 mixture containing 0.6% graphene oxide–coated fibers. The findings indicate that sisal fiber reinforcement enhances the compressive strength of geopolymer mortars. Furthermore, surface modification with graphene oxide was observed to markedly improve strength development by reinforcing the fiber–matrix interfacial interaction. It was concluded that natural fibers can serve as a sustainable and high-performance reinforcement material in geopolymer systems when an appropriate fiber ratio and effective surface modification are employed.
dc.identifier.citationBenlioğlu, A., Özen, S., Altin, Y., & Mardani, A. (2026, May 30). Investigation of the Compressive Strength and Fresh Properties of Modified Natural Fiber-Reinforced Geopolymer Composites. 10. ISPEC International Congress on Modern Scientific Research, Madrid, Spain.
dc.identifier.endpage810
dc.identifier.isbn979-8-89695-433-0
dc.identifier.startpage798
dc.identifier.urihttps://hdl.handle.net/20.500.12885/7120
dc.institutionauthorBenlioğlu , Arif
dc.institutionauthorÖzen, Süleyman
dc.institutionauthorAltın, Yasin
dc.institutionauthorid0000-0001-6685-2319
dc.institutionauthorid0000-0001-5522-427X
dc.institutionauthorid0000-0002-8554-3025
dc.language.isoen
dc.publisherLiberty Academic Publishers
dc.relation.ispartof10. ISPEC International Congress on Modern Scientific Research 18-25 April
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectSisal Fiber
dc.subjectGraphene Oxide Coating
dc.subjectSurface Improvement
dc.subjectFresh Properties
dc.subjectCompressive Strength
dc.titleInvestigation of the Compressive Strength and Fresh Properties of Modified Natural Fiber-Reinforced Geopolymer Composites
dc.typeConference Object

Dosyalar

Orijinal paket

Listeleniyor 1 - 1 / 1
Yükleniyor...
Küçük Resim
İsim:
Investigation of the Compressive Strength and Fresh Properties of Modified Natural Fiber-Reinforced Geopolymer Composites.pdf
Boyut:
1,48 MB
Biçim:
Adobe Portable Document Format