The Mechanical Properties of Fiber Reinforced Mortars Containing Air Entraining Admixtures

dc.authorid0009-0006-2414-5249
dc.authorid0000-0001-6685-2319
dc.authorid0000-0001-5522-427X
dc.contributor.authorOzansoy, Ayşe İrem
dc.contributor.authorBenlioğlu, Arif
dc.contributor.authorÖzen, Süleyman
dc.date.accessioned2026-11-20T06:34:13Z
dc.date.issued10-11 October 2024
dc.departmentBTÜ, Mühendislik ve Doğa Bilimleri Fakültesi, İnşaat Mühendisliği Bölümü
dc.description.abstractThis study investigates the effects of steel, carbon, basalt, and polypropylene fibers on the workability and mechanical properties of mortar mixtures containing an air-entraining admixture. Five mortar mixtures were prepared using CEM I 42.5R cement, standard sand, water-reducing admixture, and air-entraining chemical admixture, along with four different fibers (steel, basalt, carbon, and polypropylene). All mixtures contained 0.1% by weight of cement as an air-entraining admixture. The control mixture was prepared without fibers, while the other mixtures were added 0.5% by volume of fibers. The water/cement ratio, sand/binder ratio, and spreading values of all mortar mixtures were kept constant at 0.485, 2.75, and 190±20 mm, respectively. As part of the fresh properties, the amount of water-reducing chemical admixture required to achieve the target spreading value was determined. Compressive strength, flexural strength, and water absorption tests were carried out on the mortar mixtures at 28 days. The results showed that the workability of mixtures containing basalt, carbon, and polypropylene fibers was negatively affected, leading to an increased need for water-reducing admixture to reach the target spread. The mixtures with basalt and carbon fibers exhibited the lowest water absorption rates, while the control, steel, and polypropylene fiber mixtures showed similar, but higher, water absorption rates compared to the others. Mixtures containing basalt and carbon fiber had the highest compressive and flexural strengths. The control mixture had the lowest strength, while mixtures containing steel and polypropylene fibers exhibited slightly higher strength performance than the control mixture.
dc.identifier.citationOzansoy, A. İ., Benlioğlu, A., & Özen, S. (2024, October 10). The Mechanical Properties of Fiber Reinforced Mortars Containing Air Entraining Admixtures. Tokyo 9th International Innovative Studies & Contemporary Scientific Research Congress, Tokyo, Japan.
dc.identifier.endpage386
dc.identifier.isbn978-625-367-884-5
dc.identifier.startpage376
dc.identifier.urihttps://hdl.handle.net/20.500.12885/7122
dc.institutionauthorBenlioğlu, Arif
dc.institutionauthorÖzen, Süleyman
dc.institutionauthorid0000-0001-6685-2319
dc.institutionauthorid0000-0001-5522-427X
dc.language.isoen
dc.publisherİKSAD Publishing House
dc.relation.ispartofTokyo 9th International Innovative Studies & Contemporary Scientific Research Congress
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectFiber
dc.subjectBasalt Fiber
dc.subjectSteel Fiber
dc.subjectCarbon Fiber
dc.subjectPolypropylene Fiber
dc.subjectAir-Entraining Admixture
dc.subjectWater Absorption
dc.subjectMechanical Properties
dc.titleThe Mechanical Properties of Fiber Reinforced Mortars Containing Air Entraining Admixtures
dc.typeConference Object

Dosyalar

Orijinal paket

Listeleniyor 1 - 1 / 1
Yükleniyor...
Küçük Resim
İsim:
The Mechanical Properties of Fiber Reinforced Mortars Containing Air Entraining Admixtures.pdf
Boyut:
1,42 MB
Biçim:
Adobe Portable Document Format