Demir, EmreDuygu, İnal KaanBedeloğlu, Ayşe2022-10-122022-10-1220222329-7670https://hdl.handle.net/20.500.12885/2076The mechanical properties of polylactic acid (PLA), polyethylene terephthalate glycol (PETG), and PLA/PETG structures manufactured using the multi-material additive manufacturing (MMAM) method were studied in this work. Material extrusion additive manufacturing was used to print PLA/PETG samples with various PLA and PETG layer numbers. By varying the top and bottom layer numbers of two thermoplastics, the effect of layer number on the mechanical properties of 3D-printed structures was investigated. The chemical and thermal characteristics of PLA and PETG were investigated using Fourier transform infrared spectroscopy and differential scanning calorimetry. Tensile and flexural strength of 3D-printed PLA, PETG, and PLA/PETG samples were determined using tensile and three-point bending tests. The fracture surfaces of the samples were evaluated using optical microscopy. The results indicated that multi-material part containing 13 layers of PLA and 3 layers of PETG exhibited the highest ultimate tensile strength (65.4 MPa) and a good flexural strength (91.4 MPa). MMAM was discovered to be a viable way for producing PLA/PETG materials with great mechanical performance.eninfo:eu-repo/semantics/closedAccess3D printingmaterial extrusiontensile propertiesflexural propertiesPLAPETGArticle10.1089/3dp.2021.0321N/AQ1