Advanced Search

Show simple item record

dc.contributor.authorOzturk, Burak
dc.contributor.authorUgur, Levent
dc.contributor.authorYıldız, Aytaç
dc.date.accessioned2021-03-20T20:12:37Z
dc.date.available2021-03-20T20:12:37Z
dc.date.issued2019
dc.identifier.issn0263-2241
dc.identifier.issn1873-412X
dc.identifier.urihttp://doi.org/10.1016/j.measurement.2019.02.009
dc.identifier.urihttps://hdl.handle.net/20.500.12885/637
dc.descriptionWOS:000464638000011en_US
dc.description.abstractThe energy cost is a significant expense in the machining companies, and the reduction of energy consumption has a critical prescription in the industry. To increase energy efficiency, machine producers have contributed by developing advanced functions for machines. Besides these, one of the main purposes of machining is to bring the desired surface roughness to the best level. In this study, it is aimed to optimize cutting parameters to minimize the surface roughness and the energy consumption in the process of the 7075-aluminium material, which is commonly used in manufacturing industry, in CNC milling machine under dry cutting conditions. Therefore, a test list was created with Taguchi L9 experiment design the surface roughness and the power consumption of the machining centre were measured by processing in the CNC milling machine according to the tool diameter, cutting depth, cutting speed and feed rate parameters. The measured values were analyzed in the Minitab 17 program for the Taguchi method. According to the results of the analysis, X axis servo motor's P-cutting value is affected by the amount of depth of 82%. However, the spindle servo motor's P-cutting value was determined to be affected by the highest 34% cutting speed. The SEC (Specific Energy Consumption) value of both servo motors is affected by the maximum amount of depth. It is the amount of SCEC (Specific Cutting Energy Consumption) allows us to characterize machinability of the materials according to results from energy consumption. SCEC value is affected by the cutting speed 53% rate in the axis servo motor. In addition, it is affected by the feed rate of 43% in the spindle servo motor. (C) 2019 Elsevier Ltd. All rights reserved.en_US
dc.language.isoengen_US
dc.publisherElsevier Sci Ltden_US
dc.relation.ispartofMeasurementen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectEnergy consumptionen_US
dc.subjectTaguchi methoden_US
dc.subjectSurface roughnessen_US
dc.subjectCutting performanceen_US
dc.titleInvestigation of effect on energy consumption of surface roughness in X-axis and spindle servo motors in slot milling operationen_US
dc.typearticleen_US
dc.departmentBTÜ, Mühendislik ve Doğa Bilimleri Fakültesi, Endüstri Mühendisliği Bölümüen_US
dc.authorid0000-0002-0729-633Xen_US
dc.contributor.institutionauthorYıldız, Aytaç
dc.identifier.doi10.1016/j.measurement.2019.02.009en_US
dc.identifier.volume139en_US
dc.identifier.startpage92en_US
dc.identifier.endpage102en_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record